Welcome to the Truvativ New锐 Sports Bicycle Handlebar Installation Guide. This guide will walk you through the process of installing your new Truvativ handlebar correctly and safely, ensuring optimal performance on your rides.

Before You Begin

Ensure that you have all the necessary tools and components for the installation:

- Truvativ handlebar

- Handlebar stem (if not included)

- Allen wrenches (sizes may vary depending on your model)

- Torque wrench

- Bicycle seat post (if applicable)

Step 1: Preparation

1. Choose a flat and stable surface to work on.

2. Remove any existing handlebars if replacing.

3. Inspect the new handlebar and stem for any damage or defects.

Step 2: Installing the Stem

1. Slide the handlebar into the stem's clamp.

2. Ensure the handlebar is centered in the stem.

3. Tighten the bolts on the stem using an Allen wrench. Do not overtighten; use a torque wrench to achieve the recommended torque setting.

Step 3: Final Adjustments

1. Check that the handlebar is level and properly aligned.

2. Test the tightness of all bolts again.

3. Take a test ride to ensure everything feels secure and performs well.

Safety Tips

- Always follow the manufacturer's guidelines for torque settings.

- Regularly check the tightness of all components during maintenance checks.

- If unsure about any step, consult with a professional mechanic.

By following this guide, you can confidently install your Truvativ handlebar and enjoy enhanced control and comfort on your bicycle. Happy cycling!

Remember, proper installation is key to maintaining the integrity and longevity of your bicycle components.